| . | ConnCode Publications | . | |||||||||||||||||||||||||||||||||
| . | Publisher of the ConnCode Connecticut Building Code | . | |||||||||||||||||||||||||||||||||
PLEASE NOTE THAT THE TITLE OF CABO/ANSI A117.1 HAS BEEN CHANGED TO ICC/ANSI A117.1 AMENDMENTS TO ICC/ANSI A117.1 - 1998 (Amd) Table 404.2.4.1 - Maneuvering Clearances for Manual Swinging Doors
1 Maneuvering space shall include full width of doorway. 2 Add 12 inches if closer and latch provided. 3 Add 6 inches if closer and latch provided. 4 Add 6 inches if closer provided. (Amd) 502.2 Vehicle Spaces. Pursuant to subsection (h) of section 14-253a, C.G.S., parking spaces designated for the handicapped on or after October 1, 1979, shall be as near as possible to a building entrance or walkway and shall be 15 feet wide including 3 feet of cross hatch, or parallel to a sidewalk on a public highway. (Del) Fig. 502.2 Vehicle Parking Space. Delete figure without substitution. (Del) 502.3 Access Aisle. Delete section and subsections without substitution. (Amd) 502.4 Floor or Ground Surfaces. Accessible parking spaces shall have a surface with a gradient not more than one unit vertical to 50 units horizontal (1:50). (Amd) 502.5 Vertical Clearance. Accessible parking spaces for vans used by persons with disabilities shall have a height of 114 inches minimum at the space and along the vehicular route thereto and shall have an access aisle 96 inches in width minimum. (Amd) 502.6 Identification. Accessible parking spaces shall be identified by above grade signs with white lettering on a blue background bearing the words "HANDICAPPED PARKING PERMIT REQUIRED" and "VIOLATORS WILL BE FINED" in addition to the International Symbol of Accessibility. Order | Contact | Online Brochure | Brochure (pdf) | Home Copyright © 1999 ConnCode Publications. All rights reserved. |
|
||||||||||||||||||||||||||||||||||